Product Description
The F-M3-2 variant is distinguished by its "2" shank length, specifically engineered for use in sheets with a thickness of 2.31 mm and greater. Once installed, the fastener becomes an integral part of the assembly, providing high-strength permanent threads without any protrusion on either the top or bottom surface.
Dual-Side Flush Finish: Remains completely flush with both sheet surfaces after installation.
High Performance: Hexagonal head provides superior torque-out resistance compared to standard round clinch nuts.
Material Integrity: Constructed from 300 Series Stainless Steel for excellent corrosion resistance.
Application-Specific Design: Optimized for harder-to-reach sheet thicknesses where the "1" shank length is insufficient.
Product Specs
- SKU:
- F-M3-2
- Part Number:
- F-M3-2
- Thread Size:
- M3 x 0.5
- Fastener Material:
- 300 Series Stainless Steel
- Standard Finish:
- Passivated (per ASTM A380)
- Thread Code:
- M3
- Shank Code:
- 2
- Min. Sheet Thickness:
- 2.31 mm
- Hole Size in Sheet (+0.08 mm):
- 4.37 mm
- Fastener Hex Size:
- 4.35 mm
- Max. Nut Height:
- 2.21 mm
- Min. Dist. Edge to Hole Center:
- 4.8 mm
- For Use in Sheet Hardness:
- HRB 70 / HB 125 or less
